Product ID:ULTRA BLUE SILICONE GASKET
MSDS Date:05/01/1995
FSC:8030
NIIN:01-299-1762
Status Code:A
MSDS Number: CLBLX

PERMATEX INDUSTRIAL

HARTFORD SQUARE N 10 COLUMBUS BLVD
HARTFORD, CT 06106
US

Emergency Phone: 800-841-1316

Info Phone: 877-376-2839

Cage: 62377

PERMATEX INDUSTRIAL

HARTFORD, CT 06106 US

Telephone: 877-376-2839

Cage: 62377

POLY(DIMETHYLSILOXANE) HYDROXY TERMINATED

CAS: 70131-67-8

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

POLY(DIMETHYLSILOXANE)

CAS: 63148-62-9

RTECS: JT6484500

MODIFIED SILICON DIOXIDE

CAS: 7631-86-9

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

VINYLOXIMINOSILANE

CAS: 2224-33-1

METHYL ETHYL KETOXIME

CAS: 96-29-7

RTECS: FL9275000

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE AND SKIN IRRITANT. MODERATELY
TOXIC BY INGESTION.
Medical Cond Aggravated by Exposure:

First Aid:INGESTION: DO NOT INDUCE VOMITING. KEEP INDIVIDUAL CALM.
OBTAIN MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. IF
SYMPTOMS PERSIST, OBTAIN MEDICAL ATTENTION. SKIN CONTACT: WASH
THROUGHLY WITH SOA P AND WATER. EYE CONTACT: FLUSH AT LEAST 15
MINITUES WITH WATER. OBTAIN MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:>93.3C, 200.F
MORE THAN 200 F
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL

Spill Release Procedures:WIPE OR SCRAPE UP SPILLED MATERIAL. MAINTAIN
GOOD VENTILATION FOR SLARGE SPILLS. PLACE SCRAP MATERIALS IN A WELL
VENTILATED AREA AND ALLOW TO CURE TO RUBBER.

Handling and Storage Precautions:STORE IN A DRY AREA BELOW 90F. KEEP
CONTAINERS CLOSED WHEN NOT IN USE. SERVICE 1-800-243-4874 FOR SHELF
LIFE INFORMATION. AVOID SKIN AND EYE CONTACT. AVOID BREATHING
VAPOR. DO NOT WEAR CONTACT LENSES WHILE APPLYING MATERIAL. VAPOR
MAY BE TRAPPED UNDER LENS.

Ventilation:PROVIDE LOCAL VENTILATION FOR PROLONGED USE IN A CONFINED
AREA.
Protective Gloves:RUBBER OR PLASTIC GLOVES
Eye Protection:SAFETY GLASSES OR GOGGLES.
Supplemental Safety and Health

Vapor Pres:LESS THAN 5MM AT 70F
Vapor Density:3.0
Spec Gravity:1.3
VOC Pounds/Gallon:51
pH:7-8
Solubility in Water:POLYMERIZED
Appearance and Odor:BLUE PASTE MILD ODOR
Percent Volatiles by Volume:3.9

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS. POLYMERIZED BY CONTACT WITH MOISTURE.
Hazardous Decomposition Products:PORMALDEHYDE, SILICA FUME, METHYL
ETHYL KETONE

Waste Disposal Methods:CURED RUBBER CAN BE INCINERATED FOLLOWING EPA
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.